风林火山系统怎么手动安装？具体步骤是怎样的？

风林火山系统手动安装详细步骤 一、准备工作 Before installation, prepare the necessary tools and materials: 1. 8GB+ USB flash drive (format to FAT32 in advance); 2. Wind Forest Volcano system image file (download from official channels, suffix .iso); 3. Disk burning tool (recommend UltraISO or Rufus). 二、制作启动盘 1. Insert the USB flash drive into the computer, open UltraISO, click "File" → "Open", select the downloaded .iso image file. 2. Click "Start" → "Write Hard Disk Image", set "Writing Method" to "USB-HDD+", confirm the USB drive letter matches, then click "Write" (⚠️ Note: This will format the U disk, back up data in advance). 三、设置BIOS/UEFI启动项 1. Restart the computer, press the boot shortcut key immediately (common keys: Del for desktops, F2/F12 for laptops; check the motherboard brand for details). 2. Enter BIOS/UEFI interface, disable "Secure Boot" (set to "Disabled" in Security settings), switch "Boot Mode" to "Legacy" (or "UEFI" based on motherboard support). 3. Set "USB flash drive" as the first boot option (move to the top in Boot Priority), press F10 to save and exit. 四、进入安装界面 After restarting, the computer will boot from the USB drive. Select "Install Wind Forest Volcano System" on the startup menu, press Enter. 五、磁盘分区关键步骤 1. On the "Where do you want to install Windows?" page, click "Custom: Install Windows only (advanced)". 2. Delete existing system partitions: Select the old system disk (usually Disk 0), click "Delete" until only "Unallocated Space" remains. 3. Create new partitions: Click "New", set the system partition size (recommended ≥50GB), then click "Apply". The system will automatically create an EFI partition (if UEFI boot) and recovery partition. 4. Select the newly created system partition (marked "Primary"), click "Next". 六、等待系统安装 The installer will automatically copy files, expand Windows, install features, and update. The computer will restart 2-3 times during this process (⚠️ Do not拔出 the USB drive until the second restart). 七、配置系统 After the final restart, enter the initial configuration interface: 1. Select "Region" and "Keyboard layout", click "Yes". 2. Skip network connection (click "I don’t have internet" → "Continue with limited setup"). 3. Set computer name and login password (optional), click "Next". 4. Disable "Diagnostic data" and "Tailored experiences" in privacy settings, click "Accept". 八、成安装 After configuration, the system will enter the desktop. Unplug the USB drive, right-click "This PC" → "Manage" → "Disk Management" to check partition status. Install drivers and software as needed to complete the manual installation.